Angles In Life Project
•Download as PPTX, PDF•
0 likes•2 views
This document defines and provides examples of different types of angles found in nature including supplementary, complementary, acute, obtuse, right, bisected, linear pair, opposite ray, and vertical angles. It also includes a bibliography of image sources.
Report
Share
Report
Share
Recommended
Angle Project
This document discusses different types of angles formed by intersecting lines, including vertical angles which are congruent, angles adding up to 180 degrees when lines intersect, right angles measuring 90 degrees, and complementary angles adding up to 90 degrees. It also defines obtuse angles as greater than 90 degrees and a straight angle measuring 180 degrees.
Angles In Life
An acute angle measures below 90 degrees, a right angle measures exactly 90 degrees, and an obtuse angle measures between 90 and 179 degrees. A straight angle is 180 degrees. Supplementary angles add up to 180 degrees, and complementary angles add up to 90 degrees. A bisected angle is split accurately in half into two congruent angles. Vertical angles are congruent angles that share a vertex. Linear pairs form a line and add up to 180 degrees when adjacent.
Angles In Life Project
This document defines and describes different types of angles. It states that a right angle measures 90 degrees, an acute angle measures between 0 and 90 degrees, and an obtuse angle measures more than 90 degrees but less than 180 degrees. It also defines complementary angles as having a sum of 90 degrees, supplementary angles as having a sum of 180 degrees, and bisected and vertical angles formed by intersecting lines. A linear pair consists of two adjacent angles with noncommon sides, while opposite rays share an endpoint and are collinear.
Angles
An angle is formed by two rays that share a common endpoint called the vertex. Angles are measured in degrees and can be acute (between 0 and 90 degrees), obtuse (between 90 and 180 degrees), right (90 degrees), reflex (between 180 and 360 degrees), or straight (180 degrees). The document provides examples of each type of angle and their degree measurements.
Angles in Life Project
An acute angle measures less than 90 degrees, a right angle equals 90 degrees, and an obtuse angle is greater than 90 degrees. A straight angle is 180 degrees. Complementary angles sum to 90 degrees, supplementary angles sum to 180 degrees, and bisecting angles split an angle in half with equal measurements. Vertical angles are non-adjacent angles formed by intersecting lines that have the same measurement, while a linear pair consists of two angles whose measurements sum to 180 degrees.
How angles add up!
This document discusses adding and subtracting angles to find new angle measures, as well as identifying complementary, supplementary, and linear pair angles. Complementary angles cover a right angle, supplementary angles sum to 180 degrees and don't have to be adjacent, and linear pairs are adjacent and supplementary angles that form a line.
Angles g7
An angle is formed by two lines that share a common point called the vertex. Angles are measured in degrees, with a full revolution being 360 degrees. A protractor can be used to both measure and construct angles. Angles are classified as acute (<90 degrees), right (90 degrees), obtuse (>90<180 degrees), or straight (180 degrees). Complementary angles sum to 90 degrees, while supplementary angles sum to 180 degrees.
Angle
This document defines different types of angles and their measurements. It describes an angle as the figure formed by two rays sharing a common vertex point. The types of angles are acute, right, obtuse, straight, and reflex angles with measurements between 0 and 360 degrees. It also defines relationships between adjacent angles which are complementary if their sum is 90 degrees and supplementary if their sum is 180 degrees. Vertical angles are formed at the intersection of two lines and are always equal.
Recommended
Angle Project
This document discusses different types of angles formed by intersecting lines, including vertical angles which are congruent, angles adding up to 180 degrees when lines intersect, right angles measuring 90 degrees, and complementary angles adding up to 90 degrees. It also defines obtuse angles as greater than 90 degrees and a straight angle measuring 180 degrees.
Angles In Life
An acute angle measures below 90 degrees, a right angle measures exactly 90 degrees, and an obtuse angle measures between 90 and 179 degrees. A straight angle is 180 degrees. Supplementary angles add up to 180 degrees, and complementary angles add up to 90 degrees. A bisected angle is split accurately in half into two congruent angles. Vertical angles are congruent angles that share a vertex. Linear pairs form a line and add up to 180 degrees when adjacent.
Angles In Life Project
This document defines and describes different types of angles. It states that a right angle measures 90 degrees, an acute angle measures between 0 and 90 degrees, and an obtuse angle measures more than 90 degrees but less than 180 degrees. It also defines complementary angles as having a sum of 90 degrees, supplementary angles as having a sum of 180 degrees, and bisected and vertical angles formed by intersecting lines. A linear pair consists of two adjacent angles with noncommon sides, while opposite rays share an endpoint and are collinear.
Angles
An angle is formed by two rays that share a common endpoint called the vertex. Angles are measured in degrees and can be acute (between 0 and 90 degrees), obtuse (between 90 and 180 degrees), right (90 degrees), reflex (between 180 and 360 degrees), or straight (180 degrees). The document provides examples of each type of angle and their degree measurements.
Angles in Life Project
An acute angle measures less than 90 degrees, a right angle equals 90 degrees, and an obtuse angle is greater than 90 degrees. A straight angle is 180 degrees. Complementary angles sum to 90 degrees, supplementary angles sum to 180 degrees, and bisecting angles split an angle in half with equal measurements. Vertical angles are non-adjacent angles formed by intersecting lines that have the same measurement, while a linear pair consists of two angles whose measurements sum to 180 degrees.
How angles add up!
This document discusses adding and subtracting angles to find new angle measures, as well as identifying complementary, supplementary, and linear pair angles. Complementary angles cover a right angle, supplementary angles sum to 180 degrees and don't have to be adjacent, and linear pairs are adjacent and supplementary angles that form a line.
Angles g7
An angle is formed by two lines that share a common point called the vertex. Angles are measured in degrees, with a full revolution being 360 degrees. A protractor can be used to both measure and construct angles. Angles are classified as acute (<90 degrees), right (90 degrees), obtuse (>90<180 degrees), or straight (180 degrees). Complementary angles sum to 90 degrees, while supplementary angles sum to 180 degrees.
Angle
This document defines different types of angles and their measurements. It describes an angle as the figure formed by two rays sharing a common vertex point. The types of angles are acute, right, obtuse, straight, and reflex angles with measurements between 0 and 360 degrees. It also defines relationships between adjacent angles which are complementary if their sum is 90 degrees and supplementary if their sum is 180 degrees. Vertical angles are formed at the intersection of two lines and are always equal.
Angles In Life
The document defines and describes various types of angles:
- Acute angles measure less than 90 degrees. Right angles measure exactly 90 degrees. Obtuse angles measure more than 90 degrees.
- Complementary angles and supplementary angles are pairs of angles whose measures sum to 90 and 180 degrees respectively.
- A bisected angle is cut into two congruent angles by a bisector. Vertical angles are two non-adjacent angles formed by two intersecting lines. A linear pair are two adjacent angles whose non-common sides form opposite rays and sum to 180 degrees.
ToBePresentedTue
The document defines and provides examples of different types of angles (acute, right, obtuse, straight) and triangles (equilateral, isosceles, right, scalene). It explains that an angle is formed by two rays sharing a common endpoint, and the interior angles of any triangle always sum to 180 degrees. Examples are given of how to identify, measure, and name different angles and triangles.
Linear Systems India
Linear Systems - leading uv flame relays, flame sensor distributors india, burner programmer in india, wholesale furnace controller, flame switch suppliers, sequence timer exporters etc.
Beat the Teacher
There are two main ways to express scale in maps using representative ratios or sentence statements. The rule of thumb for converting between ratio scale and meters is to add or remove two zeros. When taking grid references, they are written as northings before eastings and can be either 4 or 6 figure references depending on if they indicate an area or single point. The steps for finding a bearing involve placing the midpoint over the origin point, setting 180 degrees to south, and reading the bearing anticlockwise.
Angles final
This document discusses different types of angles:
- Right angles measure 90 degrees and have perpendicular arms.
- Acute angles measure less than 90 degrees.
- Obtuse angles measure between 90 and 180 degrees.
- Straight angles extend 180 degrees in opposite directions to form a straight line.
It also contains examples of each type of angle as characters (Mrs. Right Angle, Baby Acute Angle, Mr. Obtuse Angle) and examples classifying angles by their measure.
Types of angles
This document defines and provides examples of supplementary and complementary angles. Supplementary angles add up to 180 degrees, while complementary angles add up to 90 degrees, forming a right angle. Mnemonic devices are provided to help remember the definitions, with "C" of Complementary standing for "Corner" and "S" of Supplementary standing for "Straight." Practice problems are included for the reader to determine if angles are supplementary or complementary, and to find a missing angle.
Choc Leaflet
Geyser is a company that designs and distributes designer heating solutions like radiators and heated towel rails. They want to work more closely with key interior and trade media titles by providing images, expert commentary, and products for photoshoots, as well as adding them to press release lists. Geyser is located in the UK and sells their own brand and other brands of heating products both online and through showrooms.
10.2 terms
The document discusses key concepts relating to arcs and chords in circles. It defines a central angle as an angle whose vertex is the center of the circle, with the measure of its corresponding arc being equal to the angle's degrees. Arcs are classified as minor, major, or semicircles based on their angle measures. Adjacent arcs can be added together to find the measure of a larger arc. There are several theorems stated about relationships between arcs, chords, diameters, and angles, such as congruent arcs corresponding to congruent chords, diameters bisecting chords and angles if perpendicular to a chord, and chords being congruent if equidistant from the center.
Circlesp2
A semicircle is half of a full circle with endpoints at the diameter. The measure of a semicircle is 180 degrees. A minor arc is smaller than a semicircle while a major arc is larger. The central angle is an angle with its vertex at the circle's center. The measure of a minor arc or major arc is equal to the measure of its central angle or 360 minus the minor arc's measure, respectively. Two arcs are adjacent if they share one point and their combined arc measure is the sum of the individual arcs.
Why heating elements fails and how to fix it
The document discusses why heating elements fail and how to fix or replace them. It provides details on:
- How heating elements work by converting electrical energy to heat through resistance.
- Testing heating elements with a multimeter to check for failures like increased or decreased resistance.
- Replacing heating elements in hot water heaters by draining the device, checking the old element, and installing the new element.
- Replacing dryer heating elements by removing power, accessing the element screws and terminals, removing the old element, and installing the new one.
- Common causes of heating element failure like oxidation and metal fatigue over time and use without proper care.
Circlespart2
The document defines key terms related to circles and arcs such as semicircle, minor arc, major arc, central angle, and adjacent nonoverlapping arcs. It explains that the measure of a minor arc or major arc is equal to the measure of its central angle or the remaining angle measure after subtracting the minor arc. Arcs are congruent if their central angles are congruent. The measure of arcs formed from adjacent nonoverlapping arcs is the sum of the individual arc measures.
3e pythagorean theorem
This document discusses how to use the Pythagorean theorem to prove that a triangle is a right triangle. It defines key terms like right angle, vertex, right triangle, legs, and hypotenuse. It states the Pythagorean theorem formula a^2 + b^2 = c^2, where the legs squared plus the legs squared equals the hypotenuse squared. The document directs the reader to page 46 to see an example of applying the Pythagorean theorem to show a triangle is a right triangle.
8.1 notes
The document discusses theorems about interior and exterior angles of polygons. It states that the sum of the interior angles of any polygon is (n-2)180 degrees, where n is the number of sides. For a quadrilateral, the sum of interior angles is always 360 degrees. The exterior angles of any polygon will also sum to 360 degrees.
EPLv2: A New Version of the Eclipse Public License
The document discusses the Eclipse Foundation's copyright and lists their name throughout. It does not contain any other substantive information beyond repeating the copyright notice and organization's name multiple times without any other descriptive text.
Angles In Life Project
The document defines and describes several types of angles:
- Acute angles are less than 90 degrees. Right angles are 90 degrees. Obtuse angles are greater than 90 degrees but less than 180 degrees.
- Complementary angles sum to 90 degrees. Supplementary angles sum to 180 degrees.
- A bisected angle is cut into two equal halves by a line. Vertical angles are two non-adjacent angles formed by two intersecting lines that are always congruent.
Angles In Life
This document defines and describes various types of angles: acute angles are less than 90 degrees; right angles are 90 degrees; obtuse angles are greater than 90 degrees. It also defines straight angles of 180 degrees, complementary angles that sum to 90 degrees, supplementary angles that sum to 180 degrees, bisecting angles that are split in half, vertical angles that have the same measurement, and linear pairs that sum to 180 degrees.
Angles In Life Presentation
The document defines and provides examples of different types of angles:
- Vertical angles are congruent angles formed when two lines intersect and share a common vertex but no interior points.
- A bisected angle is divided into two congruent angles by a ray.
- Supplementary angles have a sum of 180 degrees.
- An obtuse angle measures more than 90 degrees but less than 180 degrees.
- Complementary angles have a sum of 90 degrees.
- A right angle measures exactly 90 degrees.
- An acute angle measures less than 90 degrees.
- A straight angle measures 180 degrees.
- A linear pair are two adjacent angles whose non-shared sides are opposite rays.
Blaireail
The document defines and describes several different types of angles:
- An acute angle measures less than 90 degrees
- A right angle measures exactly 90 degrees
- An obtuse angle measures more than 90 degrees
- Two angles whose measures sum to 90 degrees are complementary
- Two angles whose measures sum to 180 degrees are supplementary
The document also lists several references used as sources for the information on angles in nature.
ail ppt
The document defines and describes several different types of angles:
- An acute angle measures less than 90 degrees
- A right angle measures exactly 90 degrees
- An obtuse angle measures more than 90 degrees
- Two angles whose measures sum to 90 degrees are complementary
- Two angles whose measures sum to 180 degrees are supplementary
The document also lists several sources used for references on angles in nature.
Types of angles vertical,complementary and supplementry angles
The power point explains the formation of an angle,different types of angles,complementary and supplementary angles and vertical angles with suitable examples.
Powerpoint
An acute angle measures below 90 degrees, a right angle measures exactly 90 degrees, and an obtuse angle measures between 90 and 179 degrees. A straight angle is 180 degrees. Supplementary angles add up to 180 degrees, and complementary angles add up to 90 degrees. A bisected angle is split accurately in half into two congruent angles. Vertical angles are congruent angles that share a vertex. Linear pairs are adjacent angles whose sum is 180 degrees.
Lines and angles class 7 mathematics
The document defines and describes various geometric angles and their relationships. It defines a line, line segment, and ray. An angle is formed by two rays sharing an endpoint called the vertex. Several types of angles are defined, including acute, right, obtuse, straight, complementary, supplementary, adjacent, linear pair, and vertically opposite angles. Acute angles measure between 0 and 90 degrees. Right angles measure 90 degrees. Obtuse angles measure between 90 and 180 degrees. Complementary and supplementary angles have sum of measures of 90 and 180 degrees respectively.
More Related Content
What's hot
Angles In Life
The document defines and describes various types of angles:
- Acute angles measure less than 90 degrees. Right angles measure exactly 90 degrees. Obtuse angles measure more than 90 degrees.
- Complementary angles and supplementary angles are pairs of angles whose measures sum to 90 and 180 degrees respectively.
- A bisected angle is cut into two congruent angles by a bisector. Vertical angles are two non-adjacent angles formed by two intersecting lines. A linear pair are two adjacent angles whose non-common sides form opposite rays and sum to 180 degrees.
ToBePresentedTue
The document defines and provides examples of different types of angles (acute, right, obtuse, straight) and triangles (equilateral, isosceles, right, scalene). It explains that an angle is formed by two rays sharing a common endpoint, and the interior angles of any triangle always sum to 180 degrees. Examples are given of how to identify, measure, and name different angles and triangles.
Linear Systems India
Linear Systems - leading uv flame relays, flame sensor distributors india, burner programmer in india, wholesale furnace controller, flame switch suppliers, sequence timer exporters etc.
Beat the Teacher
There are two main ways to express scale in maps using representative ratios or sentence statements. The rule of thumb for converting between ratio scale and meters is to add or remove two zeros. When taking grid references, they are written as northings before eastings and can be either 4 or 6 figure references depending on if they indicate an area or single point. The steps for finding a bearing involve placing the midpoint over the origin point, setting 180 degrees to south, and reading the bearing anticlockwise.
Angles final
This document discusses different types of angles:
- Right angles measure 90 degrees and have perpendicular arms.
- Acute angles measure less than 90 degrees.
- Obtuse angles measure between 90 and 180 degrees.
- Straight angles extend 180 degrees in opposite directions to form a straight line.
It also contains examples of each type of angle as characters (Mrs. Right Angle, Baby Acute Angle, Mr. Obtuse Angle) and examples classifying angles by their measure.
Types of angles
This document defines and provides examples of supplementary and complementary angles. Supplementary angles add up to 180 degrees, while complementary angles add up to 90 degrees, forming a right angle. Mnemonic devices are provided to help remember the definitions, with "C" of Complementary standing for "Corner" and "S" of Supplementary standing for "Straight." Practice problems are included for the reader to determine if angles are supplementary or complementary, and to find a missing angle.
Choc Leaflet
Geyser is a company that designs and distributes designer heating solutions like radiators and heated towel rails. They want to work more closely with key interior and trade media titles by providing images, expert commentary, and products for photoshoots, as well as adding them to press release lists. Geyser is located in the UK and sells their own brand and other brands of heating products both online and through showrooms.
10.2 terms
The document discusses key concepts relating to arcs and chords in circles. It defines a central angle as an angle whose vertex is the center of the circle, with the measure of its corresponding arc being equal to the angle's degrees. Arcs are classified as minor, major, or semicircles based on their angle measures. Adjacent arcs can be added together to find the measure of a larger arc. There are several theorems stated about relationships between arcs, chords, diameters, and angles, such as congruent arcs corresponding to congruent chords, diameters bisecting chords and angles if perpendicular to a chord, and chords being congruent if equidistant from the center.
Circlesp2
A semicircle is half of a full circle with endpoints at the diameter. The measure of a semicircle is 180 degrees. A minor arc is smaller than a semicircle while a major arc is larger. The central angle is an angle with its vertex at the circle's center. The measure of a minor arc or major arc is equal to the measure of its central angle or 360 minus the minor arc's measure, respectively. Two arcs are adjacent if they share one point and their combined arc measure is the sum of the individual arcs.
Why heating elements fails and how to fix it
The document discusses why heating elements fail and how to fix or replace them. It provides details on:
- How heating elements work by converting electrical energy to heat through resistance.
- Testing heating elements with a multimeter to check for failures like increased or decreased resistance.
- Replacing heating elements in hot water heaters by draining the device, checking the old element, and installing the new element.
- Replacing dryer heating elements by removing power, accessing the element screws and terminals, removing the old element, and installing the new one.
- Common causes of heating element failure like oxidation and metal fatigue over time and use without proper care.
Circlespart2
The document defines key terms related to circles and arcs such as semicircle, minor arc, major arc, central angle, and adjacent nonoverlapping arcs. It explains that the measure of a minor arc or major arc is equal to the measure of its central angle or the remaining angle measure after subtracting the minor arc. Arcs are congruent if their central angles are congruent. The measure of arcs formed from adjacent nonoverlapping arcs is the sum of the individual arc measures.
3e pythagorean theorem
This document discusses how to use the Pythagorean theorem to prove that a triangle is a right triangle. It defines key terms like right angle, vertex, right triangle, legs, and hypotenuse. It states the Pythagorean theorem formula a^2 + b^2 = c^2, where the legs squared plus the legs squared equals the hypotenuse squared. The document directs the reader to page 46 to see an example of applying the Pythagorean theorem to show a triangle is a right triangle.
8.1 notes
The document discusses theorems about interior and exterior angles of polygons. It states that the sum of the interior angles of any polygon is (n-2)180 degrees, where n is the number of sides. For a quadrilateral, the sum of interior angles is always 360 degrees. The exterior angles of any polygon will also sum to 360 degrees.
EPLv2: A New Version of the Eclipse Public License
The document discusses the Eclipse Foundation's copyright and lists their name throughout. It does not contain any other substantive information beyond repeating the copyright notice and organization's name multiple times without any other descriptive text.
What's hot (14)
EPLv2: A New Version of the Eclipse Public License
EPLv2: A New Version of the Eclipse Public License
Similar to Angles In Life Project
Angles In Life Project
The document defines and describes several types of angles:
- Acute angles are less than 90 degrees. Right angles are 90 degrees. Obtuse angles are greater than 90 degrees but less than 180 degrees.
- Complementary angles sum to 90 degrees. Supplementary angles sum to 180 degrees.
- A bisected angle is cut into two equal halves by a line. Vertical angles are two non-adjacent angles formed by two intersecting lines that are always congruent.
Angles In Life
This document defines and describes various types of angles: acute angles are less than 90 degrees; right angles are 90 degrees; obtuse angles are greater than 90 degrees. It also defines straight angles of 180 degrees, complementary angles that sum to 90 degrees, supplementary angles that sum to 180 degrees, bisecting angles that are split in half, vertical angles that have the same measurement, and linear pairs that sum to 180 degrees.
Angles In Life Presentation
The document defines and provides examples of different types of angles:
- Vertical angles are congruent angles formed when two lines intersect and share a common vertex but no interior points.
- A bisected angle is divided into two congruent angles by a ray.
- Supplementary angles have a sum of 180 degrees.
- An obtuse angle measures more than 90 degrees but less than 180 degrees.
- Complementary angles have a sum of 90 degrees.
- A right angle measures exactly 90 degrees.
- An acute angle measures less than 90 degrees.
- A straight angle measures 180 degrees.
- A linear pair are two adjacent angles whose non-shared sides are opposite rays.
Blaireail
The document defines and describes several different types of angles:
- An acute angle measures less than 90 degrees
- A right angle measures exactly 90 degrees
- An obtuse angle measures more than 90 degrees
- Two angles whose measures sum to 90 degrees are complementary
- Two angles whose measures sum to 180 degrees are supplementary
The document also lists several references used as sources for the information on angles in nature.
ail ppt
The document defines and describes several different types of angles:
- An acute angle measures less than 90 degrees
- A right angle measures exactly 90 degrees
- An obtuse angle measures more than 90 degrees
- Two angles whose measures sum to 90 degrees are complementary
- Two angles whose measures sum to 180 degrees are supplementary
The document also lists several sources used for references on angles in nature.
Types of angles vertical,complementary and supplementry angles
The power point explains the formation of an angle,different types of angles,complementary and supplementary angles and vertical angles with suitable examples.
Powerpoint
An acute angle measures below 90 degrees, a right angle measures exactly 90 degrees, and an obtuse angle measures between 90 and 179 degrees. A straight angle is 180 degrees. Supplementary angles add up to 180 degrees, and complementary angles add up to 90 degrees. A bisected angle is split accurately in half into two congruent angles. Vertical angles are congruent angles that share a vertex. Linear pairs are adjacent angles whose sum is 180 degrees.
Lines and angles class 7 mathematics
The document defines and describes various geometric angles and their relationships. It defines a line, line segment, and ray. An angle is formed by two rays sharing an endpoint called the vertex. Several types of angles are defined, including acute, right, obtuse, straight, complementary, supplementary, adjacent, linear pair, and vertically opposite angles. Acute angles measure between 0 and 90 degrees. Right angles measure 90 degrees. Obtuse angles measure between 90 and 180 degrees. Complementary and supplementary angles have sum of measures of 90 and 180 degrees respectively.
Similar to Angles In Life Project (8)
Types of angles vertical,complementary and supplementry angles
Types of angles vertical,complementary and supplementry angles
Recently uploaded
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
ScyllaDB Tablets: Rethinking Replication
ScyllaDB is making a major architecture shift. We’re moving from vNode replication to tablets – fragments of tables that are distributed independently, enabling dynamic data distribution and extreme elasticity. In this keynote, ScyllaDB co-founder and CTO Avi Kivity explains the reason for this shift, provides a look at the implementation and roadmap, and shares how this shift benefits ScyllaDB users.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
What is an RPA CoE? Session 2 – CoE Roles
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Recently uploaded (20)
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Angles In Life Project
- 1. Angles in Life ProjectAngles We Find In Nature By: Erin Wright and AnishaZaman
- 2. Supplementary 2 angles whose measure has a sum of 180 degrees
- 3. Complementary 2 angles whose measures have a sum of 90 degrees
- 4. An angle whose measure is between 0 and 90 degrees Acute
- 5. Obtuse An angle whose measure is more than 90 degrees and less than 180 degrees
- 6. Right An angle whose measure equals 90 degrees
- 7. Bisected A divided angle that has 2 congruent angles
- 8. Linear Pair A pair of adjacent angles whose non-common sides are opposite rays, with a measure of 180 degrees
- 9. Opposite Ray 2 rays with a common endpoint that form a straight line
- 10. Vertical 2 congruent, non-adjacent angles formed by 2 intersecting lines
- 11. Bibliography http://wwwdelivery.superstock.com/WI/223/1525/PreviewComp/SuperStock_1525R-88956.jpg http://farm4.static.flickr.com/3009/2357555410_ac35a43f4e.jpg?v=0 http://www.luminous-landscape.com/images/Spider.jpg http://www.fotoangles.com/landscapes/slides/landscape22.jpg http://farm1.static.flickr.com/84/273501951_231e1138b9.jpg http://exposureroom.com/members/ARK.aspx/assets/66c78711621e4eae8853261e1e38a7ee/ http://www.fotoangles.com/nature/slides/nature03.jpg http://blog.epicedits.com/wp-content/uploads/wide-angle-vertical1.jpg http://www.robertbody.com/arizona08/images/2008-04-06-hav-mooney-1040v.jpg Thanks to Google Images where Erin & myself got all the images.